Project overview
-
Location: Denman Prospect, Canberra, ACT
-
Property type: Residential house (Light interior palette)
-
Products supplied: Kitchen cabinetry, built-in wardrobes, bathroom vanities, stone benchtops, and stainless steel benchtops
-
Design scope: Full AutoCAD shop drawings and 3D renders
-
Fulfillment: Direct factory shipping from Foshan to the site, paired with local installation in Australia
Sourcing full-house joinery for a new build in Canberra often means choosing between high local showroom prices or managing overseas freight on your own. For this residential project in Denman, Foshan Building Supply handled the complete process from initial AutoCAD drafting and 3D renders to factory production, door-to-door shipping, and on-site installation in the ACT.
The homeowner wanted a consistent light-toned palette across every room, combining warm neutral doors with practical work surfaces suited to heavy daily cooking.
Kitchen joinery with stone and stainless steel benchtops

Most residential kitchens rely on a single benchtop material, which can leave wet preparation zones or secondary sculleries prone to heat marks and staining. For the Denman house, we fabricated two distinct worktops to match how each zone is used.
The main island and display zones use light stone countertops that tie into the pale cabinetry doors and open-plan living floor. For the heavy-use cooking and sink preparation areas, we supplied custom-fabricated stainless steel countertops. Stainless steel handles hot pans, water spills, and food prep without requiring sealing, while giving the kitchen a clean commercial edge.
All base, wall, and pantry cabinets were pre-drilled on CNC machines at the factory to align with the stone and stainless steel cutouts before shipping.
(Planning a light-toned kitchen? Pair pale cabinetry and stone benchtops with our Kit Kat Tiles or Marble Mosaics on the splashback.)
Custom wardrobes and bathroom vanities
Using the same manufacturer for the bedrooms and bathrooms kept the panel colors and shadowlines uniform throughout the house.
-
Bedroom wardrobes: Built-in wardrobes finished in the same light neutral palette as the main living area, with internal hanging rails, shelving, and soft-close drawers sized to the room dimensions.
-
Bathroom vanities: Moisture-resistant vanity cabinets topped with stone counters, pre-configured for plumbing traps and basin mixers.
For Canberra homes where winter temperatures drop low, pairing wall-hung bathroom vanities with underfloor-heating-compatible porcelain is a practical choice. Our 600x1200 Terra Travertine Look Tiles and Grip Anti-Slip Tiles match the light tones used in this Denman residence.
From AutoCAD drawings to local installation in Canberra
Ordering directly from Foshan does not mean your builder has to figure out unlabeled flat-packs on site. We ran this Canberra project through four clear stages:
-
AutoCAD and 3D design: Our drafting team converted the house floor plans into detailed AutoCAD elevations and 3D renders so the owner could check every drawer width, door swing, and benchtop joint before production started.
-
Factory manufacturing: Cabinets, stone slabs, and stainless steel tops were produced together to verify that all measurements matched the signed drawings.
-
Direct shipping to Canberra: The completed joinery package was packed into crates and shipped directly from Foshan to the Denman site address.
-
Local Australian installation: Our local installation team in Australia unloaded and fitted the cabinetry, wardrobes, vanities, and benchtops on site.
Request a quote for your project
We supply and install custom joinery and tiles for residential builds and renovations across Canberra, Sydney, and surrounding regions.
Send your architectural plans or room dimensions to info@foshan.com.au or call (+61) 456 777 333 to get an itemized quote and 3D design proposal for your home.